Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, SIL, screw connection, standard configuration.
Input for standard temperature sensors (RTDs), resistance-type sensors, and potentiometers
Intrinsically safe inputs [Ex ia] IIC
Current output 0 mA ... 20 mA or 4 mA ... 20 mA
High level of accuracy over the entire measuring range
Configuration via software (Analogue-CONF or DTM)
3-way electrical isolation
High transmission accuracy
Status and error indicator
Power supply possible via DIN rail connector
Housing width of 12.5 mm
Screw or push-in connection available
| 屬性 | 數值 |
|---|---|
| 模塊類型 | 溫度轉換器 |
| 輸入信號類型 | RTD,電位計 |
| 輸出信號類型 | 電流 |
| 電源電壓 | 24V 直流 |
| 輸入范圍 | -200 → +850°C, 0 → 50 kΩ |
| 輸出范圍 | 0 → 20 mA, 4 → 20mA |
| 危險區認證 | ATEX |
| 安裝類型 | DIN 卡軌安裝 |
| 工作溫度范圍 | -40 → +70°C |
