TE Connectivity MPG series of miniature Push Button switches are available in a choice of SPDT or DPDT contact configurations with momentary switching function and solder terminals.
MPG switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.
Accessories for the MPG miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock numbers 134-2462 and 7830053 respectively.
瞬時或交替切換
125V 交流時最大開關額定值為 6A，250V 交流時 3A
銀包銅鍍金觸點
M6 襯套
焊接端子觸點電阻
<最大 10mΩ
介電強度 1500 V 交流（1 分鐘）
絕緣電阻最小 1000MΩ
機械壽命 >50,000 次操作
工作溫度范圍：-20 至 +80°C
Actuator button is not supplied with the switch and must be ordered separately. For a suitable 15mm black button see stock number 7830053
Momentary switches have the momentary state displayed in brackets, e.g. on - (on).
| 屬性 | 數值 |
|---|---|
| 開關操作 | 瞬間 |
| 安裝類型 | 面板安裝 |
| 照明 | 否 |
| 觸點配置 | 單刀雙擲 (SPDT) |
| 面板切口大小 | 6.35 (Dia.)mm |
| 面板切口直徑 | 6.35mm |
| 額定電壓 | 250V 交流 |
| 觸點額定電流 | 6 A @ 120 V 交流 |
| 執行器形狀 | 柱塞 |
| 接端類型 | 線焊片 |
